Caution on installing and operating with HID Conversion Kits

1. It's recommended that a professional vehicles electrician to carry out the HID Lamp installation.

2. When installing electronic controller, polarities of 12V (24V) power supply should be distinguished as follow : Red line for positive and black line for negative, if you connect it in the wrong way, the electronic controller will be damaged.

3. When installing the assembly parts for the HID lamp, don’t touch the quartz glass cell with hand, the oil grease from human will leave marks on the HID bulb and causes a big problem on the lamp.

4. Once the installation is completed, use nylon binding wires to fasten the controller and other parts with neighboring metals.

5. The electronic controllers are waterproofed , while other car mounted electronic units cannot be fluted or soaked in water.

6. HID lamp is usually used for low lamp for a brighter light intensity. If you use it for high beam , it will affect other driver’s vision.

7. Since HID starts with high voltage , you must pay close attention to all warnings on high voltage during the installation. And don’t look at the hid bulbs directly, it will damage your vision.